Japan Telec certification

Japan Telec certification

What is Japan Telec certification

"Radio Law" requires that the designated radio equipment type approval (that is, technical regulations compliance certification). Certification is mandatory. The certification body is a registered certification body recognized by MIC within the scope of designated radio equipment. TELEC (Telecom Engineering Center) is the main registered certification body for radio equipment conformity certification in Japan. (1) TELEC certification standard For the technical standards of certification, please refer to the classification and technical standards of the designated radio equipment listed in the official website technical regulations compliance certification system. It is worth noting that when these technical standards differ from the technical requirements of the Radio Regulatory Commission Rules No. 18, the Radio Regulations shall prevail. (2) Certification type TELEC certification includes Test Certification and Type Certification. The test certification is for each device unit. The certification is only valid for each verified device unit. The test items of WiFi and Bluetooth products are basically similar to the European standard EN300 328. Among them, 2.4GHz WiFi products (802.11b /g, 2412~2472 MHz) and Bluetooth products use the standard MIC Notice No.88 Annex43, but for the 14 channels of 2.4GHz WiFi products (Channel 14: 2471 ~ 2497MHz), you need to use Annex44 separately for testing and issuing reports, The corresponding fee also needs to be increased. For 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the test standard that is followed is Annex45, but it should be noted that the data shows that MIC will modify Annex45 in the near future, and the 5.6GHz device (Band W56) will also It is included in Annex45 and has stricter DFS test requirements for Band 56 band.

 

Documents to be submitted for TELEC certification
(1) Technical model specification table

(2) Quality management system statement
(3) Quality control confirmation method or manufacturer's ISO 9001 certificate
(4) Confirmation of construction guarantee

(5) Rated power statement
(6) Antenna report

(7) Test report (including test results, test setup photos and inspections performed)
(8) Block diagram, schematic diagram, bill of materials, part placement, IC data sheet, internal and external photos, product description, user manual, operation/technical description, accessory description)

(9) Tag information (tag position, tag content)

(10) If you act as an agent or authorized representative, the manufacturer also needs a letter of attorney/authorization letter

Description:

1. All documents submitted are suggested to be Japanese documents, and English documents can also be accepted. The test report can be in the language used by the local testing agency.

TELEC certification of WLAN and Bluetooth products;
2.TELEC is a mandatory certification for wireless products in Japan, which is similar to domestic SRRC. It follows the Japanese radio law. The specific test specifications follow the MIC (Ministry of Internal Affairs and Communications) Notice No. 88 regulations
3. The test items of WiFi and Bluetooth products are basically similar to the European standard EN300 328. Among them, the standard used by 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products is MIC Notice No.88 Annex43, but for 14 channels of 2.4GHz WiFi products (Channel 14: 2471 ~ 2497MHz), separate Use Annex44 for testing and issuing reports.
4. For 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the test standard to be followed is Annex45, but it should be noted that the data shows that MIC will modify Annex45 in the near future and convert 5.6GHz equipment (Band W56 ) Is also included in Annex45, and has stricter DFS test requirements for Band 56.
All the above specifications go back to Annex 1, so you should also pay attention to the content of Annex 1 when referring to the above standards.

Certification cycle

Around four weeks, depending on the specific product