A-Tick certification

A-Tick certification

A-Tick is a certification mark issued by the Australian Communications Authority (ACA) for communication equipment and requires the following:

Import and export must follow the steps below to use A-Tick:

(1) The product performs ACA technical standard test;

(2) Register with ACA to use A-Tick;

(3) Fill in the "Declaration of Conformity Form" and keep it with the product conformance record;

(4) A-Tick logo is affixed to communication products or equipment;

(5) Sales to consumers.

 

Australian A-Tick certification technical information

AC voltage: 240V

Working frequency: 50Hz
 

Australian A-Tick certified product range

Any consumer device and consumer connection that can be connected to the public telecommunications network of an operator or an operating service provider are telecommunications products defined in the label announcement, such as answering machines, mobile phones, fax machines, telephones (including cordless phones) ), modem, etc.
 

Australian A-Tick certified factory inspection
No factory inspection is required.

 

Australia A-Tick certification notice

Since November 2001, the EMI application for Australia and New Zealand has been merged; if the product is to be sold in both countries, the following documents must be prepared before sale in order to prepare for random inspection by the ACA (Australian Communications Authority) or New Zealand (Ministry of Economic Development) authorities :

1) The test report must be issued by NATA or the NATA concession agency, such as NVLAP or A2LA accredited laboratories to be valid, otherwise the rate of sample delivery is very high;

2) It must be signed by an Australian or New Zealand company or importer. The manufacturer responsible for the signature is responsible for ensuring that the products sold still meet the EMI regulations;

3) Original design drawings and specifications (such as: circuit diagrams, block diagrams, User’s Manual and Service Manual, etc.);

4) Describe the production inspection procedures at the time of production to ensure the maintenance of EMI characteristics;

5) Any change description and necessary test records that will affect EMI.

 

Australian A-Tick certification information

1. The contact address for the contact details of the manufacturer applying for the certification product and the party applying for certification;

2. A copy of the installation and user manual of the certified product that will be provided to the user (if the product does not have a user manual, a copy of the relevant content can be provided);

3. Product electrical schematic diagram and working principle description;

4. The working oscillation frequency table of related products, the signal propagation path and the corresponding oscillation frequency should be listed in the table;

5. Other product features that need to be explained.

Note: 1) Unless otherwise specified, the above information is provided in English;

2) For the application of multiple models of products, provide information for each model;
3) If it is a series product application, the similarities and differences between the different models of the product must be attached.
 
Australian A-Tick certification process

1. Sample;

2. Product information;

3. Application form;

4. Sign the agreement;

5. Pay the corresponding amount;

6. Carry out the test;

7. Issue a report;

8. Receive reports and certificates.

 

Australian A-Tick certification cycle

Period: 1-2 weeks; Validity: Indefinite (standard needs to be updated after expiration)
发送反馈
历史记录